Reset the Drum Counter Make sure the machine is turned on Close the front cover Press OK and the Up arrow key at the same time Press OK to select Drum Press the Up arrow key to reset the drum counter
Category: How To Section
How to reset TONER for Brother MFC-7360N
How to reset TONER for Brother MFC-7360N Tested on MFC-7360n but should work on similar models 1. Open the front panel. 2. Press the Clear/Back button, will show: REPLACE DRUM? 1. Yes 2. No (Ignore the display) 3. Type “*00” on the keypad. “accepted” will display on screen 4. Close the front panel, and you… Continue reading How to reset TONER for Brother MFC-7360N
How to Reset Brother Drum
Select Model: HL Series: All Models MFC Series: MFC-7220 / MFC-7360N / MFC-7840w
How to remove HP 5000/5200 Fuser
Turn off printer and allow to cool for at least 20 minutes before proceeding. From the back of the printer press the 2 tab towards the centre to open the door. Located on the left side, pinch the plastic support strap. Squeeze the tab while pulling up to remove the strap, try wiggling and tugging… Continue reading How to remove HP 5000/5200 Fuser
Canon Reset or Bypass with with Remanufacture / Refilled Cartridges
All canon printers will let the user use remanufactured or refilled cartridges. But there is a trick required by the user to reset or bypass the error that will come up. Please note, the error may not come up right away when a cartridge is installed. So first you simply install the cartridge into the… Continue reading Canon Reset or Bypass with with Remanufacture / Refilled Cartridges